4KW 220V Vertical Axis Wind Power Turbine Permanent Magnet Wind Generator

  

Adopting the vertical blade and triangular double-pivot design, the main points of force are concentrated in the hub, so that the blades are lost, broken and leaves fly out and other problems are better solved. The use of aircraft wings with horizontal rotation and blade application, reducing noise in the natural environment to imperceptible levels. Horizontal rotation and triangular double pivot design make it only small wind pressure, so it can withstand 45m/s super typhoon.

Due to its design structure and special working principle, it has a smaller rotation radius than other types of wind turbines, it saves space while improving efficiency. The starting wind speed is lower than other types of wind turbines, the rate of increase in power generation is relatively small, so between 5-8 meters wind speed range, it can generate 10-30% power than other types of wind turbines.

Through the special control principle, the effective wind speed range is expended to 2.525m/s, with the maximum use of wind resources, it achieves higher power generation and improves the economics of wind power investment. The blade itself has speed protection and can configure manual mechanical and electronic brakes. In the absence of typhoon and super squall area, the manual brake will suffice.

Permanent magnet generator with direct drive, without gearbox and steering mechanism, regularly (usually every six months) check the connection of the running parts. The turbine could be installed near facilities such as homes, parks, schools, building roofs, roads and pedestrian streets, etc. Rated voltage: 48V / 96V / 120V / 220V.

Start wind speed: 3 m/s. Wind wheel diameter: 2.0 m.

Generator: 3-phase permanent magnet AC synchronous generator. Permanent Magnet Material: Rare Earth NdFeB. Working temperature: -40 to 80.

Lifespan: More than 20 years. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "bayoung-new-energy" and is located in this country: CN.

This item can be shipped worldwide.

1. Wind wheel diameter: 2M
2. System Configuration: on Grid-Tie
3. Start-up wind speed: 4 M/S
4. Security wind speed: 45 M/S
5. Power Source: Wind
6. Shell material: LS3 aluminum alloy shell
7. Wattage: 4000W
8. Material: Aluminum alloy
9. Rated Wind Speed: 12m/s
10. Working temperature: -40°C~80°C
11. Brand: Bayoung
12. Current Type: AC
13. Type: Wind Turbine Generator
14. Voltage: 48V 96V 220V
15. Recommended Environment: Outdoor
16. Number of Blades: 3
17. Power: 4000W