6000W 96V Vertical Wind Turbine Generator & Charge Controller Off Grid Inverter
Adopting the vertical blade and triangular double-pivot design, the main points of force are concentrated in the hub, so that the blades are lost, broken and leaves fly out and other problems are better solved. The use of aircraft wings with horizontal rotation and blade application, reducing noise in the natural environment to imperceptible levels. Horizontal rotation and triangular double pivot design make it only small wind pressure, so it can withstand 45m/s super typhoon. Due to its design structure and special working principle, it has a smaller rotation radius than other types of wind turbines, it saves space while improving efficiency. The starting wind speed is lower than other types of wind turbines, the rate of increase in power generation is relatively small, so between 5-8 meters wind speed range, it can generate 10-30% power than other types of wind turbines. Through the special control principle, the effective wind speed range is expended to 2.525m/s, with the maximum use of wind resources, it achieves higher power generation and improves the economics of wind power investment.
The blade itself has speed protection and can configure manual mechanical and electronic brakes. In the absence of typhoon and super squall area, the manual brake will suffice. Permanent magnet generator with direct drive, without gearbox and steering mechanism, regularly (usually every six months) check the connection of the running parts. The turbine could be installed near facilities such as homes, parks, schools, building roofs, roads and pedestrian streets, etc. Wind wheel diameter: 3.0 m.
Start wind speed: 4 m/s. Generator: 3-phase permanent magnet AC synchronous generator.
Lifespan: More than 20 years. Permanent Magnet Material: Rare Earth NdFeB. Working temperature: -40 to 80. Mounting accessory 1 x PWM Charge Controller 1 x Off Grid inverter.