6KW Vertical Wind Turbine 96V-380V Wind Generator for Off Grid / on Grid System

  
Adopting the vertical blade and triangular double-pivot design, the main points of force are concentrated in the hub, so that the blades are lost, broken and leaves fly out and other problems are better solved. The use of aircraft wings with horizontal rotation and blade application, reducing noise in the natural environment to imperceptible levels. Horizontal rotation and triangular double pivot design make it only small wind pressure, so it can withstand 45m/s super typhoon. Due to its design structure and special working principle, it has a smaller rotation radius than other types of wind turbines, it saves space while improving efficiency.

The starting wind speed is lower than other types of wind turbines, the rate of increase in power generation is relatively small, so between 5-8 meters wind speed range, it can generate 10-30% power than other types of wind turbines. Through the special control principle, the effective wind speed range is expended to 2.525m/s, with the maximum use of wind resources, it achieves higher power generation and improves the economics of wind power investment. The blade itself has speed protection and can configure manual mechanical and electronic brakes. In the absence of typhoon and super squall area, the manual brake will suffice.

Permanent magnet generator with direct drive, without gearbox and steering mechanism, regularly (usually every six months) check the connection of the running parts. The turbine could be installed near facilities such as homes, parks, schools, building roofs, roads and pedestrian streets, etc. Wind wheel diameter: 3.0 m.

Start wind speed: 4 m/s. Generator: 3-phase permanent magnet AC synchronous generator. Lifespan: More than 20 years. Permanent Magnet Material: Rare Earth NdFeB. Working temperature: -40 to 80.

Wind turbine Pole is not include, but the package will come with the flange. Please prepare 8 -12 m pole for the wind turbine.

This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "bayoung-new-energy" and is located in this country: CN. This item can be shipped worldwide.

1. Volt: 96V
2. Current Output: 40-49 A
3. Wind wheel diameter: 3M
4. System Configuration: Grid-Tie
5. Start-up wind speed: 4 M/S
6. Power Source: Wind
7. Custom Bundle: No
8. Wattage: 6000W
9. Rotor Diameter: 3m
10. Rated Wind Speed: 12m/s
11. Item Length: 365cm
12. Working temperature: -40°C~80°C
13. Current Type: AC
14. Voltage: 120V/220V/380V
15. Features: All Daylight Conditions, Automatic Voltage Detection, Bluetooth Module, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding
16. Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection
17. Security wind speed: 45 M/S
18. Shell material: LS3 aluminum alloy shell
19. Inverter Technology: Hybrid
20. Current Rating: 31-40 A
21. Material: Aluminum alloy
22. Brand: Bayoung
23. Type: Wind Turbine Generator
24. Model: EnFH3.6
25. Recommended Environment: Indoor/Outdoor
26. Number of Blades: 3
27. Charging Mode: MPPT (Maximum Power Point Tracking)
28. Item Weight: 232kg
29. Power: 6000W
30. Package Size: 161*45*7CM/365*26*53CM