Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. However, wind turbines that are available for homeowners in the market today are mostly designed (or copied) a decade ago and although they work, most have mechanical flaws that were neglected since their debut and there is a lot of room for improvements. With that in mind, we have redesigned a new wind turbine - the Apollo. Built-in with a stronger alternator for higher power output, Anti-vibration system to increase power efficiency, and the ability to be customized and upgraded for the future.Exploded View (No inverter, batteries, turbines and solar panels included in this listing) only the highlight parts are included. No nose cone, and tail.
Apollo True power 5000w VS Competitor's 400w-5200w. Using 5000W and other brands to power halogen lamp. Test By Halogen Lamp, Not LED! What is the difference in an Apollo Wind Turbine?
GreenergyStar's Apollo Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other.Products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features.
The above battery charging power curve is obtained from charging a 12V 200Ah battery bank with our SolarWind Hybrid Charge Controller. (not included in this listing).
For those who are serious about wind power generation, this is a must have item. Never again will the cable get twisted up. Never again will you have to climb up the ladder and fix the tangles. Get a slip ring today and you can put all of that behind you.
40'C to 100'C. M22x1.5 22mm diameter 1.5mm Thread Pitch. High voltage / current carrying capacity - Copper-graphite brushes ensure long life even under extreme load conditions - Quick connector for fast connection to the AC / wind turbine see reference picture below - Insulated with fiberglass sleeves to protect wires to the wind turbine and make the installation professional and tidy - Easily taken apart for quick maintenance - 2x High Quality Metal Sealed Ball bearing to stabilize axle. As we can see from the exploded view, the top circuit is color coded Red, the middle circuit is Black and the bottom circuit is Blue. Pros - Larger diameter, thicker core - The cross-sectional area of the coil is larger, so the magnetic flux is larger and the efficiency is greater.
Core area = 26 x 12 = 312 mm. Cons - only 12mm thickness and thus weaker magnetic flux - cross-sectional area of the coil is small and electricity output is lower Core area = 12 x 5 = 60 mm. Pros - The area of magnets are 40 x 24.
More electricity can be generated. Cons - The area of magnets are 12 x 16. Less electricity can be generated. Pros Wire diameter 1.3 = 1.3266mm.Temperature 20 °C max current 15.5393 x 3 = 46.61A. Cons Wire diameter 0.5 = 0.196mm.
Temperature 20 °C max current 0.8683 x 3 = 2.604A. Pros - Dual Metal ball bearing located at front and rear of rotor - 6.5cm of stabilizing distance to prevent rotor and blades from vibrating - No vibration = Increase in efficiency - Reduction in noise output. Cons - 2 bearings placed side by side together - Stabilizing distance effectively shorten to 2cm (69% reduction) - Vibration = Energy wasted - Wasted energy gets converted to Noise and Heat. Pros - Triple Metal ball bearing to prevent vertical vibration - Yaw shaft diameter: 40mm - 3cm of stabilizing distance with 2 bearings - No vibration = Increase in efficiency - Reduction in noise output - One piece design Yaw body provides more stability. Cons - Single bearings will not eliminate vertical vibration - Yaw shaft diameter: 35mm - Stabilizing distance effectively shorten to 1.4cm with one bearing (53% reduction) - Vibration will cause bearing to grind on yaw shaft and create a bigger play, which in turn will cause more vibration in a never ending cycle - 2 pieces design Yaw body is less stable.12 V (400 rmp) / 24 V (750 rmp). 9.04kg (19.90 lb). Yaw Body / Tower Mount Inner Diameter. 53.3mm, 2.1 inch. 1.5 inch schedule 40 pipe Actual Pipe diameter: 48mm (1.9 inch) Recommend adding 2.5mm padding. Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a person could come in contact with moving rotor blades. The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products. Any unauthorized disassembly, repair, or modification. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. Spams and mass e-mailing will be deleted without slightest glance.
E-mails with virus or anything subjected to hacking are automatically deleted. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "hi_iq" and is located in this country: US.
This item can be shipped to United States, Mexico, Germany, Japan, United Kingdom, France, Australia.