Wind Generator Turbine

Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V


Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V

Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V   Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V

Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V. This controller can control wind turbines to.

When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.

Voltage and current limiting are be enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable. Of modular design, which makes the performance of the whole system to get the biggest safeguard.

Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment.

The protection grade reaches the IP68 above, even in water can steadily work normally for a long time. What kinds of battery I can connect with this controller? This controller designed for Lead-acid and GEL battery. How to know WT060M with MPPT function. When wind speed will not strong enough, such as wind speed in 5-8 meter/s, through the professional equipment, we can find it can output enough voltage to charge your battery. If without this MPPT function, we can find the wind turbine sometimes is stop or in very slow running in the same wind speed, even the output current is in "0", the voltage output is very small. What different between WT060 and WT060M. Especially under slow wind speed, WT060M can boost up charge voltage as high as meeting charging demand voltage. This is the most direct and effective way to increase power efficiency.

My wind turbine is DC output with 2 cable, how to connect with your controller? There are 3 terminals on controller for wind turbine connecting.

If I reverse connection with the battery, what happened? The controller may be damaged. When the brake will be started? If the wind speed is too fast even lost controller, the controller will start barking to limit the charge circuit.

Or when the battery is full and not need to be charged again, it will start braking also. If I can't release the braking, how can I do? You can release all cables connect, then re-connecting your system again.

The brake will be released automatically. How to extend the controller service life? First obey the correct connecting order. 1The wires between battery and the controller must be connected firstly.

2Then to connect the wires between wind turbine and controller. 3When connecting wires, must keep your wind turbine in stop situation. Second don't over circuit service. To 12v battery, try to connect the wind turbine rated power under 400W(if wind turbine top net weight over 15KGS).

To 24v battery, 0-600w wind turbine rated power is acceptable. If I need to connect more big power wind turbine, can you supply? Yes, to this series, the max we can supply is to connect with 2KW 48V AC wind turbine.

If I want to connect with solar panel, how can I do? There are some hybrid wind solar controller in MPPT, especially model no.

Which type wind turbine generator is suitable for this controller? Not matter horizontal and vertical axis wind turbines generator, this controller is workable. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact.

It must also be in the original packaging. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "ginmega" and is located in this country: CN.

This item can be shipped worldwide.

  1. Color: 1000W 48V
  2. Brand: Unbranded
  3. Type: Wind Turbine Generator
  4. Power Source: Wind
  5. Resistance Properties: Waterproof


Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V   Wind Charge Controller Waterproof 1000W 1500W 2000W Turbine Generator 24V 48V